Wall Stud Calculator

Framing a wall? Enter the length, height, and stud spacing to get the stud count, the top and bottom plates, and the sheathing sheets — the standard framing takeoff, done in your browser.

Standard framing estimate. Studs are counted at the chosen spacing plus one end stud, one extra stud per corner, and two per opening (king + jack). Plates are bottom plate plus top plate(s). Sheet count assumes 4 × 8 ft sheets. Headers, sills, cripples, blocking, and fire-stopping are not counted — add those from your framing plan, and always check your local building code.

Frequently Asked Questions

How many studs do I need for a 10 ft wall?

At 16 inches on center, a 10 ft wall needs 8 studs: 120 inches ÷ 16 = 7.5, rounded down to 7 bays, plus 1 end stud. Add one extra stud per corner and two per door or window opening.

Is 16 or 24 inch spacing better?

16 inches on center is the standard for load-bearing walls and gives a stiffer wall with more nailing surface for drywall. 24 inches on center uses fewer studs and is common for non-load-bearing interior walls, but check your local code — some jurisdictions require 16 inches for exterior walls.

What is a double top plate?

A second plate nailed on top of the first, used on most load-bearing walls to tie intersecting walls together and spread the load from joists and rafters. It adds one more wall-length of lumber to the takeoff.

How many sheets of drywall or sheathing does a wall need?

Divide the wall area by 32 (one 4 × 8 ft sheet) and round up. An 8 ft × 10 ft wall is 80 sq ft, so 3 sheets. Openings are not subtracted here — the extra covers cuts and waste.

Do corners and openings really need extra studs?

Yes. A corner needs at least one extra stud to give drywall a nailing edge, and each opening needs a king stud and a jack stud on each side to carry the header. This calculator adds 1 per corner and 2 per opening as a standard allowance.

Is this calculator private?

Yes. It runs 100% in your browser with no accounts and no servers — your measurements never leave your device.