Soffit Calculator
Covering a roof overhang? Enter the total eave length and the soffit width to get the soffit area, the number of panels, and the J-channel for both edges — in your browser, no sign-up.
Frequently Asked Questions
How do you measure soffit?
Measure the total length of the eaves (all sides of the house added together) in linear feet, and the width from the fascia board back to the wall in inches. Area = length × width. A 100 ft eave at 12 in wide is 100 sq ft of soffit.
How many soffit panels do I need?
Divide the soffit area by the coverage of one panel (panel length × soffit width) and round up, then add waste. With 12 ft panels at 12 in wide, each panel covers 12 sq ft — 100 sq ft needs 9 panels before waste, 10 with 10% waste.
What is J-channel and how much do I need?
J-channel is the trim that holds the soffit panel edges — one run along the wall and one along the fascia. You need twice the eave length in linear feet, and since it is sold in 12 ft sticks, divide by 12 and round up: 200 linear ft needs 17 sticks.
Should I use vented or solid soffit panels?
Vented panels let air into the attic and are the usual choice for eaves over attic space — they work with ridge vents to move air. Solid panels are for areas that do not need ventilation, such as porch ceilings. The panel count is the same either way.
What is the standard soffit width?
12 inches is the most common residential overhang, with 16 and 24 inches also common on larger homes. Measure your actual overhang — the width is whatever your fascia-to-wall distance is, not a standard number.
Is this calculator private?
Yes. It runs 100% in your browser with no accounts and no servers — your measurements never leave your device.