Window Replacement Cost Calculator
How much will replacing your windows cost? Pick a window type and frame material, enter how many windows you need and the per-window rates from your quotes, and this page adds up the window cost plus installation labor. The default rates come from published 2026 cost guides — they are a starting point for budgeting, not a contractor quote.
| Window type | Materials-only range per window | Default used |
|---|---|---|
| Single-hung | $100 – $400 | $250 |
| Double-hung | $150 – $650 | $400 |
| Sliding | $150 – $800 | $475 |
| Casement | $150 – $1,000 | $575 |
| Picture (fixed) | $300 – $1,200 | $750 |
| Bay | $600 – $4,500 | $2,250 |
Sources: Angi, "How to Choose Replacement Windows" (updated August 9, 2026) for the per-type materials-only ranges and averages; Angi/HomeAdvisor averages for frame materials — vinyl $550, wood $800, fiberglass $1,250, aluminum $275, composite $900 per window; Angi 2026 guide for installation labor of $100–$300 per window. For context, Angi's October 2026 data puts the national average installed window at about $750 and a typical whole project at $7,348 ($3,436–$11,838). Ranges last verified November 2026.
Formula: windows subtotal = quantity × cost per window; labor subtotal = quantity × labor per window; total = windows subtotal + labor subtotal. The low–high range uses the type's published low/high plus $100/$300 labor per window.
Frequently Asked Questions
How much does it cost to replace a window?
Angi's October 2026 data puts the national average at about $750 per window installed, with most windows between $300 and $3,500 and a typical whole project at $7,348. The spread is wide because type, material, size, and glass package all move the price — a single-hung vinyl window can be a few hundred dollars while a bay window can run into the thousands.
Which frame material costs the most?
Of the common materials, fiberglass averages the most at about $1,250 per window (Angi/HomeAdvisor), followed by composite at $900 and wood at $800. Vinyl is the budget standard at about $550, and aluminum the cheapest at about $275. Material alone does not set the price — the window type and size matter at least as much.
Why is labor shown separately?
Because the per-type ranges on this page are materials-only (Angi lists them that way), while installers quote labor separately — Angi's 2026 guide lists $100–$300 per window for standard installation. Keeping labor separate lets you enter the labor rate from your own quote instead of guessing a combined figure.
What is the difference between insert and full-frame installation?
Insert (retrofit) installation fits the new window into the existing frame and runs about $100–$300 per window in labor; full-frame installation replaces the whole frame, costs more ($180–$1,500 per window per Angi's 2026 guide), and is needed when the existing frame is rotted or damaged. If your frames need repair, expect the full-frame end of the range.
Is this a quote I can show a contractor?
No. This is a rough planning estimate built from national published averages. A real quote depends on measurements, the exact product, and local labor — get two or three itemized quotes for the same scope and compare them line by line.