Pressure Washing Estimate Calculator

How much does pressure washing cost? Enter the surface area and the surface type, and this page estimates a price range from published 2026 per-square-foot rates. Rates are prefilled from national cost guides and are fully editable — replace them with a local quote if you have one.

Heavy buildup typically adds 25–50% to the price, per Angi's cost data.

Rates update automatically when you change the surface type. A $100 minimum job charge is applied to the low end, because most companies charge $100–$150 minimum per visit.

Estimate only — not a quote. Actual prices vary by region, access, surface condition, and contractor. Roofs must be soft-washed (low pressure plus cleaning solution); high-pressure washing can strip asphalt shingle granules and void the roof warranty. Get 2–3 local quotes before booking.

Rates: Angi, “How Much Does It Cost to Pressure Wash a House?” (updated October 13, 2026) — national average $312 per job; driveway $0.20–$0.40 per sq ft; roof $0.50–$1.00 per sq ft; overall $0.10–$0.50 per sq ft. Siding $0.15–$0.35 and deck $0.50–$1.00 per sq ft per HomeAdvisor/Angi 2026 data as compiled by Estimator Suite (July 2026); deck $0.25–$0.50 per sq ft per SkillMammoth's 2026 rate card (HomeGuide and Angi data) — this page uses $0.25–$0.50 for decks. Heavy-buildup surcharge of 25–50% per Angi's cost data. Minimum-job note ($100–$150) per Estimator Suite. Last verified November 2026.

Frequently Asked Questions

How much does pressure washing cost per square foot?

Most residential work runs $0.10–$0.50 per square foot, depending on the surface. Concrete driveways are cheapest at $0.20–$0.40 per square foot; house siding runs $0.15–$0.35; wood decks $0.25–$0.50; roofs $0.50–$1.00 because they need a soft wash with specialized chemicals.

What does the average pressure washing job cost?

Angi's 2026 data puts the national average at $312 per job, based on over 51,000 verified projects. A standard two-car driveway typically costs $100–$250, a patio $100–$200, and a roof $450–$700.

Why does heavy mold or algae cost more?

Heavy buildup takes longer, uses more cleaning solution, and sometimes needs a second pass. Angi's cost data puts the surcharge at roughly 25–50% over a standard clean. This calculator applies that range when you select “Heavy buildup”.

Can I pressure wash my roof?

Only with a soft wash — low pressure plus a cleaning solution. The Asphalt Roofing Manufacturers Association recommends against high-pressure washing of asphalt shingles: it strips protective granules and can void the manufacturer warranty.

Is there a minimum charge?

Yes, in practice. Most companies charge a $100–$150 minimum per visit, so very small jobs still cost at least that much. This calculator applies a $100 floor to the low end of the estimate.

Why do quotes for the same job vary so much?

Local labor rates, water access, how dirty the surface is, and whether the contractor includes chemicals and cleanup all move the price. Rates in high-cost metros sit at the top of every published range, while smaller markets sit near the bottom.