Pool Salt Calculator

How much salt does my pool need? Enter your pool's gallons plus current and target salt levels in ppm, and this salt pool calculator tells you exactly how many pounds of pool salt to add. Switch tabs for a pool chlorine calculator, pool shock calculator dose for free chlorine, or a pool volume estimator if you don't know your gallons.

Frequently Asked Questions

How much salt does my pool need?

Most saltwater pools target 3,000–3,500 ppm. This salt pool calculator compares your current reading to your target and converts the difference to pounds of pool salt using your pool's gallonage — a typical 20,000-gallon pool rising from 0 to 3,200 ppm needs roughly 530 lb of salt.

How does the pool chlorine calculator work?

Enter your gallons and current free chlorine (FC) reading plus your target. The calculator assumes standard 73% calcium hypochlorite shock, where 1 lb per 10,000 gallons raises FC by about 7 ppm, and converts that to ounces of shock to add.

What does the pool shock calculator assume?

It assumes calcium hypochlorite (cal-hypo) at 73% strength — the common granular shock. If you use dichlor or liquid chlorine instead, doses differ, so always check the product label and retest the water after dosing.

How do I estimate pool volume if I don't know my gallons?

Use the Pool Volume tab: pick rectangle, round, or oval, enter the dimensions in feet, and it converts cubic feet to gallons. Rectangle pools use length × width × average depth × 7.48; round and oval shapes use their standard factors.

How much shock do I need to shock my pool?

Use the Shock tab: enter your pool gallons and your current and target free chlorine, and it returns the dose of 73% calcium hypochlorite in pounds and ounces. The formula is (gallons ÷ 10,000) × (target − current) ÷ 7. For example, raising free chlorine from 1 to 10 ppm in a 20,000-gallon pool takes about 2.6 lb of shock (about 41 oz).

What is superchlorination (breakpoint chlorination)?

Superchlorination means raising free chlorine high enough to destroy combined chlorine (chloramines) — the breakpoint is roughly 10 times your combined chlorine reading. If your combined chlorine is 0.5 ppm, you need to raise free chlorine by about 5 ppm. Use the Shock tab with that target. Keep swimmers out until free chlorine falls back to the normal 1–4 ppm range.

How many 40-lb bags of salt do I need?

Use the Salt tab: it returns both the pounds of salt to add and how many 40-lb bags that is, rounded up. For example, taking a 20,000-gallon pool from 0 to 3,200 ppm needs 535 lb of salt — 14 forty-pound bags. Add it in stages with the pump running, brush until dissolved, and retest after 24 hours.

What is a saltwater pool? Does it still need chlorine?

A saltwater pool uses a salt chlorine generator (SWG) to turn dissolved salt into chlorine, so you do not add chlorine tablets or liquid day to day. It is still a chlorinated pool: you still need to test and maintain free chlorine, pH, and alkalinity, and you may still need to shock it after heavy use, storms, or an algae bloom. Use the Salt tab to find how much salt to add to reach your generator's target range.