Paver Calculator

How many pavers do you need for a patio, walkway, or driveway? Enter the area and the paver size, add a wastage allowance for cuts and breakage, and get the number to buy — rounded up, so you never come up one paver short.

Assumption. This calculation assumes a tight layout with negligible joint gaps. Wider joints need slightly fewer pavers; diagonal or herringbone patterns need more cuts, so consider raising the wastage allowance to 15% for those patterns.

Frequently Asked Questions

Why add a wastage allowance?

Edge cuts, broken pieces, and a few spares for future repairs. 10% covers most straight-lay rectangular patios; diagonal or herringbone patterns cut more pieces, so 15% is the safer choice there.

Why is the count rounded up?

You cannot buy part of a paver. Both the base count and the with-wastage count are rounded up to whole pavers, so the number you see is the number to order.

Do joint gaps change the count?

Slightly. This calculator assumes tight joints. If you leave wide gaps (for example, grass or gravel joints), the pavers cover less of the area and you need slightly fewer — the difference is small for narrow joints and grows with gap width.

What if my area is not a rectangle?

Measure it in rectangles and add the areas together, or use the total-area mode with the measured square footage. For curves, measure the bounding rectangle and keep the wastage allowance at the high end, since curved edges mean more cuts.

Should I buy extra beyond the wastage count?

Keeping a few spare pavers from the same batch is wise: dye lots vary, and a matching replacement years later is hard to find. The with-wastage count already includes spares for breakage; add a handful more if you want long-term replacements.