Home Inspection Cost Calculator
What does a home inspection cost? Enter the home's size and age, tick any add-on tests you need, and this page estimates the total from published 2026 pricing. The base fee covers a standard visual inspection; radon, termite and sewer-scope testing are separate services billed on top.
Homes over 25 years old: a sewer scope is strongly recommended — older clay or cast-iron lines are far more likely to have problems.
Base fee covers a standard home up to 2,000 sq ft. Above that, inspectors add roughly $0.15–$0.30 per square foot, per Angi's pricing research.
Left at 0% by default: no published national figure exists for an age premium, so this page does not invent one. If your inspector quotes an older-home surcharge, enter it here and it applies to the base fee only.
Base fee: Angi / HomeAdvisor 2026 data — national average $344, typical range $296–$424 for a standard single-family home under about 2,000 sq ft. Size adjustment: roughly $0.15–$0.30 per sq ft above the size cutoff, per Angi's pricing research. Add-ons: HomeGuide researched ranges — radon $125–$400, termite $50–$350, sewer scope $125–$500 (Angi: radon $150–$710 standalone, termite $75–$325, sewer $150–$500). Sewer-scope guidance for homes over 25 years old per Real Cost Report. Last verified November 2026.
Frequently Asked Questions
How much does a home inspection cost?
Nationally, a standard home inspection averages $344 in 2026, with most buyers paying $296–$424, per Angi/HomeAdvisor data. A typical range across sources is $300–$500 for a standard single-family home, with larger homes costing more.
How does home size change the price?
Most inspectors price by square footage. Roughly: under 1,000 sq ft around $200; 1,000–2,000 sq ft $300–$400; 2,000–3,000 sq ft $400–$500. Above about 2,000 sq ft, inspectors add roughly $0.15–$0.30 per extra square foot.
What is included in a standard home inspection?
A visual, non-invasive check of the structure, roof, plumbing, electrical, heating and cooling, and interior — the scope defined by the InterNACHI and ASHI Standards of Practice. It does not include radon, mold, termite, sewer-line, well, septic or pool testing; those are separate paid add-ons.
How much do radon, termite and sewer scope add-ons cost?
Radon testing typically $125–$400; a termite / wood-destroying-insect inspection $50–$350; a sewer scope $125–$500. A buyer ordering several add-ons can spend $700–$1,200 or more in total before closing.
Is a sewer scope worth it on an older home?
Usually yes. Sewer lines on homes over 25 years old — especially clay or cast-iron pipe — are far more likely to be cracked, root-damaged or collapsed, and a full line replacement runs $3,000–$25,000. A $125–$500 camera inspection is cheap insurance before closing.
Does the inspection price vary by location?
A lot. Metro location swings the price by as much as 50% for the same service: New York and Philadelphia average about $450, while Miami runs near $300. Always get 2–3 quotes from licensed local inspectors.