Exponential Growth Calculator

See what steady percentage growth does over time. Enter a starting value, a growth rate per period, and a number of periods to get the final value, the total growth percentage, and the doubling time — with a period-by-period table so you can watch the curve bend upward.

Discrete vs continuous. Discrete compounding applies the rate once per period: final = P(1 + r)t. Continuous compounding applies it constantly: final = P·ert. Continuous always ends slightly higher for the same rate — at 10% for 10 periods, 2,718.28 vs 2,593.74 on a starting 1,000. Doubling time is ln(2)/ln(1 + r) periods discrete, ln(2)/r continuous; with a zero or negative rate the value never doubles, so no doubling time exists.

Formulas: discrete final value P(1 + r)t; continuous final value P·ert; total growth = (final − initial) / initial × 100%; doubling time solves 2 = (1 + r)t (discrete) or 2 = ert (continuous). “Period” is whatever unit your rate uses — years, months, or anything else — as long as rate and periods use the same unit.

Frequently Asked Questions

What is the difference between discrete and continuous compounding?

Discrete compounding grows the value in steps: once per period, the whole period's rate is applied at once. Continuous compounding grows it constantly, every instant. For the same rate and time, continuous ends a little higher, because each instant's growth immediately starts earning its own growth. The gap grows with the rate: at 10% for 10 periods it is about 125 on a starting 1,000; at 1% it is almost nothing.

How is doubling time calculated?

By solving for the time t at which the value doubles: 2 = (1 + r)t for discrete compounding, giving t = ln(2)/ln(1 + r); or 2 = ert for continuous, giving t = ln(2)/r. At 10% discrete that is about 7.27 periods — the classic "rule of 72" (72 ÷ 10 = 7.2) is a rough shortcut for the same number.

Why does a zero rate show no doubling time?

Because a value growing at 0% never changes, so it never doubles — the doubling time is not zero, it does not exist. The same applies to a negative rate (the value shrinks). The page says so plainly instead of showing Infinity.

Can I use months instead of years?

Yes. A "period" is whatever unit your rate uses. If your rate is 2% per month and you enter 12 periods, you get one year of monthly growth. Just keep the rate's unit and the period count in the same unit — do not mix a yearly rate with a monthly period count.

Why does the table stop at 10 periods?

To keep the page readable. The table shows the first 10 periods so you can see the curve's shape; the final value above it is computed for your full period count even when that count is larger than 10.