Ductwork Replacement Cost Calculator
Replacing the ducts in a home is usually priced per linear foot, and the rate depends on the duct material and how hard the runs are to reach. Enter your duct footage (or home size), pick a material and an accessibility level, and this page estimates a low–high replacement cost range from published 2026 rates.
Rates are installed prices including removal, from Angi's 2026 duct replacement guide. Change them if a local quote gives you different numbers.
Accessibility factors are planning adjustments, not published rates: easy runs cost less to install, difficult runs cost more. The per-foot rates above are the published figures.
Per-foot rates: Angi, “How Much Does Duct Replacement Cost? [2026 Data]” (updated August 25, 2026; 3,970 verified projects) — flexible duct $10–$18, sheet metal $15–$25, fiberglass $20–$30 per linear foot installed including removal; national average $1,251, with most homeowners paying $452–$2,183. Cross-checks: HomeGuide $25–$55 per linear foot; This Old House $16–$19 per linear foot. Duct footage per home size: 1,000 sq ft ≈ 50–80 ft, 1,500 sq ft ≈ 80–120 ft, 2,000 sq ft ≈ 120–160 ft (2026 contractor pricing data). Last verified November 2026.
Frequently Asked Questions
How much does ductwork replacement cost?
Angi's 2026 data (3,970 verified projects) puts the national average at $1,251, with most homeowners paying $452–$2,183. Whole-home replacements commonly run $1,400–$5,600, and larger or complex systems can reach $12,000. The per-foot rate depends on material: flexible duct $10–$18, sheet metal $15–$25, fiberglass $20–$30 per linear foot installed, including removal.
How many linear feet of ductwork does a house have?
As a planning rule, about 0.07 linear feet per square foot of home: roughly 50–80 feet for a 1,000 sq ft home, 80–120 feet for 1,500 sq ft, and 120–160 feet for 2,000 sq ft. The actual figure depends on the layout — count supply and return runs, or ask the contractor to measure during the quote.
Which duct material is cheapest?
Flexible duct is cheapest to install ($10–$18 per linear foot) and easiest to run through tight spaces, but it lasts 10–20 years and can kink. Sheet metal costs more ($15–$25) but lasts 25–30+ years and moves air most efficiently. Fiberglass ($20–$30) insulates well and dampens noise, but costs the most and can grow mold if it gets wet.
Why do published cost guides disagree so much?
Because they measure different scopes. Angi's per-foot rates include removal and installation; some guides quote material only, others include new insulation, registers, plenums and permits. A quote that looks cheap may exclude removal or insulation, so compare itemized quotes line by line rather than headline totals.
Does accessibility really change the price?
Yes — it is one of the two biggest price drivers, along with home size. Ducts in an open basement are fast to replace; ducts buried in a tight crawl space or behind finished walls take far longer and can add 25% or more to the labor. This calculator applies a planning factor (×0.9 easy, ×1.0 standard, ×1.25 difficult) — treat it as a rough adjustment, not a published rate.
Should I replace the ducts and the HVAC system together?
Often, yes. If the furnace or air conditioner is also near the end of its life, doing both at once saves on labor because the crew is already opening the same spaces. Get separate line items in the quote so you can see what the ducts alone cost versus the combined job.