Circle Skirt Calculator
A circle skirt is a ring of fabric: the waist is the inner edge of the ring and the hem is the outer edge. Enter your waist, the skirt length and how full you want it, and this page gives you the waist radius to cut, the outer radius, the hem length and how many yards of fabric to buy for your fabric width.
Measure at the waistband level. Add a little ease (about 1/2–1 inch) if you want the skirt to sit loosely, or if the fabric has no stretch.
Measured from the waistband to the finished hem.
A full circle skirt rarely fits on 44-inch fabric without seams — the yardage below shows how many pieces you need and whether they fit side by side.
Formulas: waist radius r = waist ÷ (2π × circle fraction) — full circle ÷ 2π, half circle ÷ π, quarter circle ÷ π/2 — as published by Omni Calculator and Minerva Patterns; outer radius = waist radius + skirt length + hem allowance; yardage by packing each quarter-circle panel's bounding square onto the fabric width, as in published circle-skirt calculators. Worked check: 28-inch waist, 22-inch length, full circle on 60-inch fabric = 1⅝ yards (55⅛ inches); the same skirt on 44-inch fabric = 3⅛ yards. Last verified November 2026.
Frequently Asked Questions
What is the circle skirt waist radius formula?
A circle's edge is 2π times its radius. For a full-circle skirt the waist is the whole edge, so waist radius = waist ÷ 2π. For a half-circle skirt the waist is half the edge, so radius = waist ÷ π; for a quarter circle, waist ÷ (π ÷ 2). A 28-inch waist gives a full-circle radius of about 4.46 inches, a half-circle radius of about 8.91 inches, and a quarter-circle radius of about 17.83 inches.
Where do I cut the waist — on the radius or inside it?
Inside it, by the seam allowance. The radius is the finished waist seamline; cut 5/8 inch inside it so the seam lands back on the radius after sewing. For a 28-inch waist full circle, the radius is 4.46 inches and the cut is at about 3.83 inches from the center.
How much fabric do I need for a circle skirt?
It depends on the length, the fullness and the fabric width. A full-circle skirt is cut as four quarter panels, each needing a square whose side is the outer radius plus a side seam. With a 28-inch waist and 22-inch length, a full circle takes about 1⅝ yards of 60-inch fabric but about 3⅛ yards of 44-inch fabric — the wider the bolt, the less you buy.
Why does a full circle skirt rarely fit on 44-inch fabric?
Because each quarter panel needs a square as wide as the outer radius. A knee-length skirt's outer radius is often 25–30 inches, so two panels side by side need 50–60 inches — wider than a 44-inch bolt. On narrow fabric you cut the panels one per row (or seam them), which roughly doubles the yardage.
Should I add ease to my waist measurement?
For a fitted waistband, use your exact waist. For a skirt that sits loosely or a fabric with no stretch, add about 1/2–1 inch of ease to the waist before calculating — the radius grows with the waist, so the skirt will hang a little looser at the waist.
How do I lay out the pattern on the fabric?
Fold the fabric into quarters and cut each quarter panel from the folded corner: the corner is the center of the circle, the waist curve is the small radius from that corner, and the hem is the large radius. Mark both curves with a string compass (a pin, a string and a pencil) or a long ruler pivoted at the corner. Cut the waist at the radius minus 5/8 inch and the hem at the radius plus 1/2 inch.